The system is a time division multiplexing conveyor that allows to distribute different bottles from your Silo storage, gaylords, or your blowmolding machine, into several filling lines, while guaranteeing the integrity of the bottles. The system communicates with each individual machine from origin to destination, so rather than investing in a single conveyor per machine, we maximize your investment by delivering all your products with ONE conveyor.
BOTTLE CONVEYOR SPECIFICATION
ALL BULK CONVEYORS INCLUDE THE FOLLOWING FEATURES:
Frame: 12ga stainless steel modular construction in 10 ft sections or less.
Side Rails: 18ga stainless steel modular construction in 8″ to 20″ high by 10ft sections or less.
Top cover supports: 18ga stainless steel separators on 4ft centers, bolted on the side rails.
Top dust covers: 18ga stainless steel or 1/8″ Lexan (clear polycarbonate) in “snap in/out” 4 ft sections.
Bottom dust covers: 18ga stainless steel in 8 or 10 ft sections bolted to frame bottom with press nuts and 1/4″ bolts.
End dust covers: 18ga stainless steel construction, installed on the frame on the tensioning arm end of the conveyor.
Standard frame unions: 3/16″ galvanized plates installed in the frame interior (not visible).
Frame stiffners: 1 1/2″ galvanized tubular steel installed in the frame interior (not visible).
Supports: Adjustable and leveling 12 and 14ga sheet metal floor or ceiling supports, galvanized.
Fastners: Grade #5 3/8″, 5/16″ and 1/4″ galvanized bolts of the appropriate length. Nylock nuts all around.
Bearings: heavy duty, self-aligning bearing (Browning brand) for 1″, 1 1/4″ and 1 3/8″ shafts.
Rollers: Heavy duty welded, galvanized, steel rollers of the appropriate width. 4″ diameter roller, 1/4″ polyurethane covering, for conveyors longer than 10ft or any bi-directional, with machined center groove for tracking.